KEY FEATURES
- Simple to set up and cost-effective
- Hot swap redundancy exchange and fail safe ready
- Stand-alone programming or Modular operation modes
- The device supports Over the Air (OTA) programming through mobile application
- Controls both parallel and angular flying shear
- Compatible with servo motor and stepper motor
- Dynamic motion profile changes such as cut lengths, etc
- 32-bit ARM core microcontroller with 48 MHz clock
- The maximum output frequency: 40KHZ
- 1x Ethernet 10/100 port
- 1x RS485 port
- 1x Analog Input
- 1x Analog Output
- 2x Relay digital output
- 120Ω terminal resistor controlled by dip switch
- High resolution 0.91” OLED display
- No drift and no re-calibration are required on the field
- Wide range of power supply options (10-60 VDC)
- Highly compacted size
- Standard din rail mounting option
Out of stock
