This is to certify that Power Meter Monitor PMM, guarantees their products for five year from installation date.
The warranty period for peripherals/accessories is as given below:
1XDIN Rail Clip
2X Mounting Bracket
2X Front Panel Bracket
1X Face Plate (4mm screw)
Warranty Terms & Conditions
This warranty is limited to either the repair or replacement (at PMM's sole discretion) of the defective product during its warranty period.
If a product is found to be defective within 3 months of its shipping date from PMM, and if the said product was properly installed and used, the product can be considered defective on arrival (DOA) and the Customer may create a DOA request online for PMM to provide expedited replacement service.
After three months from its shipping date from PMM, Customers must create a service request prior to sending the defective product to PMM for repair by email to or
Customers agree to ensure their product or assume the risk of loss or damage during transit, to prepay shipping charges, and to use the original shipping container or an equivalent when they ship their product to PMM for repairs. Customers may either seek assistance from the original dealer (Israr Engineering LLC).
Customers shall be responsible for backing up their product configuration settings and data contained in internal storage (hard drives, flash drives, etc.) before sending their products for repair. PMM will not be responsible for loss of data or configuration settings stored in the product.
Repaired or replaced products are warrantied for 3 months from the date of repair or replacement, or for the remainder of the original product's warranty period, whichever is longer.
PMM will not accept products that are returned without a valid service request or items that are not PMM products. Such products will be shipped back at the Customer’s own risk and expense. No refunds or exchanges will be offered.
This warranty does not cover:
Products found to be defective after the warranty period has expired.
Products subjected to misuse or abuse, whether by accident or other causes. Such product conditions will be determined by PMM at its sole and unfettered discretion.
Products damaged due to a natural disaster, including but not limited to lightning, flooding, earthquake, or fire.
Products modified in any way NOT described explicitly in the corresponding product's user manuals. (NOTE: The product's user manuals provide instructions for installing, configuring, and maintaining your PMM product. Please refer to the user manuals before installing or configuring the product.) Software products.
Expendable items, such as a fuse.
Products with an altered and/or damaged serial number.
Any HDD, SSD, CFast, DOM, CF, or SD shipped with a PMM product and that had reached a natural limitation as defined by their original equipment manufacturer warranty policies or as detected by the inspection utilities provided by the OEM.
For more information, please refer to the Component Compatibility Guide for the product
Loss of data or software.
LCD panels that have pixel defects that do not qualify for warranty service as defined in the Warranty Policy for Display Pixel Defects.
Products that have been updated, reworked, or improperly tested by the Customer, or by a third party at the request of the Customer.
Customized and original design manufacturer (ODM) products. The warranty terms for customized and ODM products should be defined in the contract that governs the project.
This warranty become invalid under the following circumstances:
If the appliance is not used in accordance with the agreed scheme or any misuse.
If the product or any component is damaged after a fall or a shock.
If dismantled or tampered with anyway.
If any fault occurred due to the incorrect power supply.
Commercial use of any component in the system appliances will void the Guarantee.
Under no circumstances, does the guarantee cover consequential damages.
If the product or any component of the system was kept in a damp place.
If the product or any component of the system has been opened by any other person other than our company’s technician.
If the product or any component of the system was exposed to extreme heat.
If the product system failed due to the voltage of electricity.
If the warranty card was lost or could not be presented to the company at the time of claiming the Warranty.
Service Terms & Charges
Once the Customer agrees to a product inspection, PMM will inspect the product, send a quote for the total repair cost, and will wait for the Customer’s approval.
If the Customer does not want PMM’s repair service, PMM will either return the defective product to the Customer or scrap the product locally, based on the Customer’s decision. If the product is out of warranty, the Customer will be responsible for the shipping costs.
Once the Customer authorizes PMM to repair the defective product, the total charges will be calculated as per the following table:
To a PMM Service Center
From a PMM Service Center to the costumer/ Distributor
Covered by PMM
Note: If the Customer does not want PMM’s repair service, PMM will either return the defective product to the Customer or scrap the product locally, based on the Customer’s decision.
Repair Fees and Parts
Note: Once the Customer agrees to a product inspection, PMM will inspect the product, send a quote for the total repair cost, and will wait for the Customer’s approval. PMM will charge for repair of products where the warranty period has expired or have damage that is excluded from the warranty coverage.
*Products within the warranty period as specified in PMM’s warranty policy and have not been excluded under any of the conditions specified in the Warranty Exclusions section.
If the warranty period of the returned product has expired or a product within the warranty period is excluded for warranty coverage due to reasons mentioned in the Warranty Exclusions section:
PMM reserves the right to repair the product in due course, based on its inventory of spare units and parts.
PMM will charge an inspection fee if the Customer agrees to PMM performing an inspection of the product. Following this, PMM will send a pro forma invoice by email that details the total charges that includes repair charges, parts, and one-way shipping cost.
After receiving the email quotation, Customers can decide whether or not they want to avail PMM’s repair service. If a Customer decides not to avail PMM’s repair service, the product will be returned to the Customer in return for the cost of shipping the product back. Alternatively, Customers can opt for PMM to scrap the product locally at no extra cost.
Post-warranty Repair Service
For large-order projects, Customers may purchase a post-warranty repair service. However, some products may have a shorter chipset life cycle, or some parts may have a limited warranty period from the original supplier of the parts. Please contact your local sales representative if you would like to avail this service.
Limitation of Liability
The provisions of this warranty are in lieu of any other warranty, whether express or implied, written or oral. PMM's liability arising out of the manufacture, sale, or supply of a product and its use, whether based on warranty, contract, negligence, product liability, or otherwise, shall not exceed the original cost of the product. In no event shall PMM be liable for unintended or consequential damages, including, but not limited to, loss of profits or use, and damages arising out of the manufacture, sale, or supplying of the product.
To verify the warranty status of your product, please send an email to info@Pmm-usa.us.